Headstock Bearings and Seals: Honda CR50 CR 50 (1983-1985) Triumph Tiger 800 Honda NT 650 (Bros) (RC31)

Honda NT 650 (Bros) (RC31) (1988-1992)

It has 8 pins and is a simple plug and play from the original CDI

so are designed to lower the height on a Honda CB550 for the years and models shown above

This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Kawasaki GPZ900 / ZX900 for the years and models shown above

This set of taper roller bearings have been designed to replace the original headstock bearings on a BMW R 60/6 for the years 1973

Headstock Bearings and Seals: Honda CR50 CR 50 (1983-1985) Triumph Tiger 800 Honda NT 650 (Bros) (RC31)Brand new set of headstock steering bearings and seals to fit: Honda CR 50 R (1983 1985). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Honda CR50 for the years and models shown above. Top sized: 22. 5mm x 41mm x 12mm. Bottom sized: 24mm x 41mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. If you require different