Headstock Bearings and Seals: Yamaha YZ80 YZ 80 (1977-1983) Aprilia RS125 the bottom is 10mm (You

the bottom is 10mm (You may need to change these to the required sizes either by using your old ones or purchasing spare bush kits from us - please see other listings)

This clutch cable has been designed to replace the original cable on a Yamaha SR500 for the years and models shown above

This set of brake pads will fit the front brake on a Yamaha XZ550 for the years and models shown above

This set of front and rear brake drum shoes have been manufactured to replace the original brake sets on a Honda TRX125 for the years and models shown above

This ignition coil set has been manufactured to replace the original coil packs on a Yamaha TRX850 for the years and models shown above

Headstock Bearings and Seals: Yamaha YZ80 YZ 80 (1977-1983) Aprilia RS125 the bottom is 10mm (YouBrand new set of headstock steering bearings and seals to fit: Yamaha YZ 80 (1977 1983). This set of head stock bearings are taper roller style and have been manufactured to replace the original set of steering bearings on a Yamaha YZ80 for the years and models shown above. Top sized: 25mm x 43mm x 12mm. Bottom sized: 30mm x 48mm x 12mm. All sizes set out ID x OD x Thickness. The seals are not included in the measurements. The seal thickness is