30486 by Midland | Push On Hose Barb | SAE/JIC 37°/45° Swivel | 1-1/16-12 UNF Thread | 3/4" Hose ID x 3/4" Female 37°/45° | 90° Elbow | Zinc Plated Steel KF Blank Flange AIGNEP USA

AIGNEP USA

37" B7MMW-G200 B7MMW-R200 2" 0

125 THK X 40 mm arbor 2" ID x 6 Wire Hydraulic Hose ET9200C-10-SM Smooth Blade 10" OD x

50 lbs AL-D1000 10" 10" 50 PSI B26

188 lbs GN 6in 6" N/A 4" 6:1 5 19 7

30486 by Midland | Push On Hose Barb | SAE/JIC 37°/45° Swivel | 1-1/16-12 UNF Thread | 3/4" Hose ID x 3/4" Female 37°/45° | 90° Elbow | Zinc Plated Steel KF Blank Flange AIGNEP USAApplications: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness. Midland Parts have been tested to max 150 PSI Advantages: Easy assembly. No clamps needed. SAE Rating: N A Lead Free: No Assembly Instructions: 1) Lubricate insert. 2) Hold hose at angle as shown & push on and up over first barb. 3) Continue to push straight on until hose is seated under protective plastic cap. Keep hands back from hose end