30377 by Midland | Push On Hose Barb Fitting | 3/8" Hose ID x 1/2" Male NPTF | 90° Elbow | Brass 6" x 6" Thread Size 1/4" Lower Mount

1/4" Lower Mount

(41-044) 3" 0

(18-081) 1/2" x 3/8" 1

3mm 32mm 24mm 0

Connection Type: Pull Pin Width: 14" Type 3 Gulper Tools are for wet/dry pick-up on most surfaces

30377 by Midland | Push On Hose Barb Fitting | 3/8" Hose ID x 1/2" Male NPTF | 90° Elbow | Brass 6" x 6" Thread Size 1/4" Lower MountApplications: Low Pressure Air, Fuel, Lube, and Oil Lines Pressure determined by tube material and hardness. Midland Parts have been tested to max 150 PSI Advantages: Easy assembly. No clamps needed. SAE Rating: N A Lead Free: No Assembly Instructions: 1) Lubricate insert. 2) Hold hose at angle as shown & push on and up over first barb. 3) Continue to push straight on until hose is seated under protective plastic cap. Keep hands back from hose end