NH1B by Jason Industrial | Sandblast Hose Coupling | Nozzle Holder | 3/4" Hose ID | 1-1/2" Hose OD | Brass Beveled End 04 lbs GRD400 4" 50

04 lbs GRD400 4" 50 PSI 1

75" Cap Screw 1 22 V10118 5/16" Split Lock Washer 1 23 12777 1/2" Plug 1 24 V10119 5/16"-18 Hex Nut 1 25 15022 Handle 1 26 17010 1/2" Hex Nut - 13UNF-RH 1 27 UV15163 O-Ring 1

5mm) 3" HT16OF16 Plug/Male 2" 2-1/2" - 12 Female ORB Steel 4

2mm 5000 PSI 344

34" GG108-NP06-16 0

NH1B by Jason Industrial | Sandblast Hose Coupling | Nozzle Holder | 3/4" Hose ID | 1-1/2" Hose OD | Brass Beveled End 04 lbs GRD400 4" 50Overview: There are three active sandblast system couplings; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron. NOZZLE HOLDERS are sleeve type