Long Range (30 m) Infrared Through Beam Photoelectric Sensor Connection Hardware & Accessories Power supply voltage 12 to

Power supply voltage 12 to 24 VDC +/-10%

Storage: -40 to 70°C (with no icing or condensation) Ambient humidity range Operating: 35% to 85%

Surge suppressor Ambient temperature range Operating/Storage: -25 to 70°C (with no icing or condensation) Ambient humidity range Operating/Storage: 35% to 95% (with no condensation) Temperature influence +/-10% max

operating voltage 135 V Max current per pin 2 A Max current per sensor port 4 A Max current total - all ports 12 A Number of sensor ports 4 Pins per port 5 Sensor connector type M12 socket Degree of protection IP65 Ambient operating temp -20⁰ C to 75⁰ C

This sensor interface has been designed to be a flexible sensor connection solution

Long Range (30 m) Infrared Through Beam Photoelectric Sensor Connection Hardware & Accessories Power supply voltage 12 toThe lubricants present in stamping dies create problems for photosensors. Droplets of lube can deflect sensing beams, and the film of dirty oil that forms on almost everything can affect sensors to the point where they will no longer operate. There are two important criteria when selecting photoelectric sensors for in die use: Use a sensor with an infrared beam that will shine through (rather than be deflected by) droplets of oil. Use a through beam