NH3B by Jason Industrial | Sandblast Hose Coupling | Nozzle Holder | 1-1/4" Hose ID | 2-5/32" Hose OD | Brass Replacement Parts for 2" M222 Series Cast Iron Manifold Wet Seal Pumps with Electric Motors 5200 16AMP-R400SMS 4" 101

5200 16AMP-R400SMS 4" 101

Coupling automatically senses an excessive load

1-1/4" 1-7/8" 150 PSI SBG Standard 0

025" 100ft/Roll - Red - C14599-P200 201 Stainless Steel 5/8" 0

Part Number Size Maximum Operating Pressure 200DD-90AL - 2" 250 PSI 300DD-90AL 300DD-90SS* 3" 125 PSI 400DD-90AL - 4" 100 PSI 600DD-90AL - 6" 75 PSI

NH3B by Jason Industrial | Sandblast Hose Coupling | Nozzle Holder | 1-1/4" Hose ID | 2-5/32" Hose OD | Brass Replacement Parts for 2" M222 Series Cast Iron Manifold Wet Seal Pumps with Electric Motors 5200 16AMP-R400SMS 4" 101Overview: There are three active sandblast system couplings; HOSE ENDS which are used to make hose to hose connections or hose to blast pot connections, NOZZLE HOLDERS that accept the male threaded end of a sandblast nozzle, and the THREADED POT END that is connected to the combination air and abrasive mix from the sandblast pot. All three are available in aluminum or brass. Hose ends are also available in Iron. NOZZLE HOLDERS are sleeve type