RB9 by Dixon Valve | Boss® Clamp | 2-Bolt Type | 2-Gripping Fingers | 3/4" Hose ID | Hose OD: from 1-20/64" to 1-32/64" | Stainless Steel Pipe to Pipe Bend Radius Weight DN mm

Bend Radius Weight DN mm in mm in bar psi bar psi mm in kg/m lbs/ft GH120-4 6 6

without Nut Tube OD Thread T1 Thread T2 A B E FF2030T0404S - 0

Series Body Size ISO Size Nominal Flow

Part Number Thread Flange

* Uses a special wing nut

RB9 by Dixon Valve | Boss® Clamp | 2-Bolt Type | 2-Gripping Fingers | 3/4" Hose ID | Hose OD: from 1-20/64" to 1-32/64" | Stainless Steel Pipe to Pipe Bend Radius Weight DN mmFeatures: 2 Bolt type clamp. 2 Gripping fingers. 2 Clamp sections. Use: The correct size Boss Clamp must be used. Bolts in Boss Clamps are designed to bend as they are tightened. This allows the clamp to conform to the hose outside diameter. Always tighten bolts to their specified torque value. Periodic re tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses. Boss Clamps are for single use only! Once removed they