B10 by Dixon Valve | Boss® Clamp | 2-Bolt Type | 2-Gripping Fingers | 3/4" Hose ID | Hose OD: from 1-32/64" to 1-44/64" | Global Investment Cast Carbon Steel LegacyProductTypeReplacement_Dixon Boss Washer Seal Stems Pressure PPE50 3/4" x 1/2"

Pressure PPE50 3/4" x 1/2" 125 PSI PPE75 3/4" 125 PSI PPE100 1" 125 PSI PPE125 1-1/2" x 1-1/4" 100 PSI PPE150 1-1/2" 100 PSI PPE200 2" 100 PSI PPE300 3" 60 PSI PPE400 4" 50 PSI

Listed by Underwriter'

66" 691X2 1/8" 1/8" 0

Applications: Temperature control circuits

Part Number Hose Shank x Female NPT WF3 - 3/8" WF6 - 1/2" WF26-1 - 1/2" x 3/4" WF26 RWF26 3/4" WF36 RWF36 1" WF51 RWF51 1-1/4" WF61 RWF61 1-1/2" WF81* RWF81* 2" WF96 - 2-1/2" WF111 - 3"

B10 by Dixon Valve | Boss® Clamp | 2-Bolt Type | 2-Gripping Fingers | 3/4" Hose ID | Hose OD: from 1-32/64" to 1-44/64" | Global Investment Cast Carbon Steel LegacyProductTypeReplacement_Dixon Boss Washer Seal Stems Pressure PPE50 3/4" x 1/2"Features: 2 Bolt type clamp. 2 Gripping fingers. 2 Clamp sections. Use: The correct size Boss Clamp must be used. Bolts in Boss Clamps are designed to bend as they are tightened. This allows the clamp to conform to the hose outside diameter. Always tighten bolts to their specified torque value. Periodic re tightening of bolts is required due to "cold flow" phenomenon present in all rubber hoses. Boss Clamps are for single use only! Once removed they